Phone: +86-18932783253

Pipe end induction heater for cylinder shrink

Pipe end induction heater for cylinder shrink

Features:

Heating temperature:1150—1250℃ Unform heating

Heating length:850—1100 mm

Heating diameter:φ660—920 mm

Product Detail

Application Video

Product Tags

Technical parameters for Pipe end induction heater for cylinder shrink

1.Steel pipe material: 30CrMo  35CrMo  42CrMo 35CrNi3MoV

2.Heating temperature:1150—1250℃ Unform heating

3.Heating width10—30 mm

4.Heating length850—1100 mm

5.Heating diameterφ660—920 mm

6.Heating timeφ711×21.5 :Heating length is 850mm, the heating time is 14 minutes with 1500KW IF induction heating.           

                                φ914×30 :Heating length is 1100mm, the heating time is 31minutes with 1500KW IF induction heating.          

7.Temperature difference: Temperature from surface to core ≤50℃;Temperature from head to tail≤50℃;

pipe end induction heater

Main configuration of Pipe end induction heater for cylinder shrink

Item

Machine Name

Specification

Quantity

1

IF power supply cabinet

1500KW/1KHz

  1 Set

2

Capacitor cabinet

 

  1 Set

3

Inductor

Heating Ф715mm steel pipe

2 Sets

4

Inductor moving mechanism device

Including base, guide, moving inductor frame (car), transmission parts, detection elements, transmission chain, water cooled cables, water line etc.

  1 Set

5

Control Cabinet     

 

1 Set

6

Connection bar(cable) from power supply cabinet to capacitor cabinet

 

1 Set

7

Connection bar(cable) from power supply cabinet to moving mechanism

 

1 Set

8

Infrared temperature measuring device

 

1 Set

Installation and commissioning for Pipe end induction heater for cylinder shrink

1 Supplier will send professional technical personnel to the buyer’s working site to guide the installation and commissioning of equipment. The equipment, tools and material required need to be supplied by buyer.After installing, commissioning and acceptance, buyer will start production.

2 The buyer should provide necessary lifting equipment and electrical welding equipment.

3.The installing and commissioning time is about 7-10 days. The cost of visa fee, round-trip tickets, accommodation and traffic in buyer’s country for supplier’s technician should be born by the buyer.In addition, the buyer should pay for 100USD for the technican per person per day as subsidy.

As the professional manufacturer of induction heating system, Forever is ready to give you the most suitable induction heat treatment solutions as per your specific requirement.

Contact-Us-Banner-1024x243-copy-copy

Contact person: Hailee Ma

Email:sales@foreverfurnace.com

Phone: 0086-18932783253(whatsapp, wechat)

RELATED PRODUCTS