Phone: +86-18932783253

How to choose the power supply of induction hardening and tempering equipment?

How to choose the power supply of induction hardening and tempering equipment?

Forever power supply used for induction hardening and tempering equipment has three types. As the energy generator of induction hardening and tempering equipment, the power supply quality is very important for the whole induction hardening and tempering equipment. Please study Forever induction heating power supply for your reference.

Forever SCR Fully Automatic Intelligent Parallel Resonance IF Power Supply

Constant power/constant angle/constant voltage, multiple running modes and on-demand switching.

● Parallel resonance design, phase-shift control; mature and stable performance; more advantages for the power of 3000KW or above.

● DSP control, start with instant capture & Phase-Locked, meet the requirement of frequent start and stop ; 100% successful start rate.

● Self-Adaptive at frequency variation or load variation;the frequency adaptation range is 200-10000Hz; induction furnace replacement is automatic matching, no need to make any manual adjustments.

● The power supply cabinet adopts T2 copper which is processed by sandblasting and passivation; low leakage inductance, antioxidant, effectively reducing line losses.

● Full touch screen control, pure digital setting, with complete process record and strict purview control.The main parameters can be one key recovery of the factory settings.

● Per single output power 50 ~ 6000KW, frequency 200 ~ 10000Hz.

http://www.foreverfurnace.com/case/billet-induction-reheating-furnace.html

Forever SCR Fully Automatic Intelligent Series Resonance IF Power Supply

Inverter and double frequency, multi-frequency output, lower power consumption performance.

● Series resonance design, rectifying all open, high power factor and low harmonic component.

● The Power supply and induction furnace always maintain the best match and full power output. Low turn-off losses; low reactive component; low line losses; saving electricity 5%-20% compared with traditional parallel inverter power supply.

● Single or multi-frequency output, low frequency preheating, high-frequency heating-up; extreme energy-saving technology. Each ton of power consumption is 310 KW/H for heating to 1150 ℃.

● The power supply cabinet adopts T2 copper which is processed by sandblasting and passivation; low leakage inductance, antioxidant, effectively reducing line losses.

● Full touch screen control, pure digital setting, with complete process record and strict purview control.The main parameters can be one key recovery of the factory settings.

● Per single output power 50-3000KW, frequency 200-16000Hz.

Forever IGBT Fully Automatic Intelligent Composite Parallel Resonance Power Supply

● Composite parallel resonance power supply design, chopping power-regulation. This design both has high stability, high adaptability of parallel resonance and advantages of series resonance high power factor and energy-saving.

● Based on the IGBT full-controlled device design, this power supply has complete protection functions which can be intelligent maintenance-free in the maximum scope. Single power supply can cover all the induction heating areas to meet your diverse requirements.

● Self-Adaptive at frequency variation or load variation;the frequency adaptation range is 200-300KHz; induction furnace replacement is automatic matching, no need to make any manual adjustments.

● The power supply cabinet adopts T2 copper which is processed by sandblasting and passivation; low leakage inductance, antioxidant, effectively reducing line losses.

● Full touch screen control, pure digital setting, with complete process record and strict purview control.The main parameters can be one key recovery of the factory settings.

● Per single output power 50-6000KW, frequency 200-300KHz.

http://www.foreverfurnace.com/case/long-bar-heat-treatment-line.html

Any questions about induction heat treatment equipment, please send us inquiry. Forever engineer team will be ready to solve your problems.

Contact-Us-Banner-1024x243-copy-copy

Contact person: Hailee Ma

Email:sales@foreverfurnace.com

Phone: 0086-18932783253(whatsapp, wechat)

Specialist of induction heating system in China; Glad to be your business partner in induction heating field.


Post time: 08-23-2017